Schematic, not to scale
16 models
| Outer diameter (mm) | Cut diameter (mm) | Staple height (mm) | Model |
|---|---|---|---|
| DH | |||
| 24 | 15 | 4.5 | DH24 |
| 26 | 17 | 4.5 | DH26 |
| 29 | 20 | 4.8 | DH29 |
| 32 | 22 | 5.0 | DH32 |
| 34 | 24 | 5.0 | DH34 |
| DHT, tilt-top anvil | |||
| 24 | DHT24 | ||
| 26 | DHT26 | ||
| 29 | DHT29 | ||
| 32 | DHT32 | ||
| 34 | DHT34 | ||
| RYCS | |||
| 21.6 | 13 | 4.8 and 5.2 | RYCS-B21 (H) |
| 23.6 | 15 | 4.8 and 5.2 | RYCS-B24 (H) |
| 25.6 | 17 | 4.8 and 5.2 | RYCS-B26 (H) |
| 28.6 | 20 | 4.8 and 5.2 | RYCS-B29 (H) |
| 31.6 | 22 | 5.2 | RYCS-B32 |
| 33.6 | 24 | 5.2 | RYCS-B34 |
On the RYCS rows the diameter column is the ring cut outer diameter.
Blank cells: measurements awaited from the manufacturer.
A single-use circular stapler for anastomosis in the digestive tract, registered at outer diameters from 21.6 to 34 mm, in a standard and a tilt-top anvil build.
In the DH family the staple height follows the diameter: 4.5 mm at 24 and 26 mm, 4.8 mm at 29 mm and 5.0 mm at 32 and 34 mm. The RYCS family is registered at 4.8 and 5.2 mm up to 28.6 mm and at 5.2 mm on the 31.6 and 33.6 mm models.
The anvil. The DHT family carries a tilt-top anvil and is registered at the same five outer diameters, 24, 26, 29, 32 and 34 mm. Its staples are a titanium alloy to GB/T 13810-2007, and tissue under 1 mm and over 2 mm is a contraindication.
