What Is the Rapid Urease (CLO) Test? Diagnosing the Stomach Bacterium H. pylori

The rapid urease test looks for the stomach bacterium (*H. pylori*) in a small stomach sample taken during endoscopy. [4][7] A positive result supports an infection. It is not a cancer diagnosis. A negative result does not always rule out the infection. Do not stop your medicines on your own; tell the endoscopy team. [4][8]

This guide is for adults. It gives general information. It does not give personal instructions. You make decisions about tests, medicines and treatment together with your doctor.

What is the stomach bacterium (H. pylori)?

Helicobacter pylori (H. pylori for short) is a bacterium that can live in the stomach. [12][13] In some people it is found without causing any symptoms. [12] In some people it may be linked to a stomach ulcer. [12]

A simple diagram showing the esophagus, the stomach and the duodenum; bacteria marked on the inner surface of the stomach. esophagus stomach H. pylori bacterium duodenum

The infection can raise the risk of stomach cancer. [12] Not everyone who has the infection develops cancer. [1][3] A positive test does not mean you have cancer. [1]

Not every stomach pain or indigestion comes from this bacterium. Your doctor assesses the cause of your symptoms.

The infection has been reported to be common in Türkiye. A nationally representative study was published in 2013 and found the infection in 82.5 percent of adults. [5] A more recent review that combines studies from different years reports that rates vary widely from country to country around the world. [6] You cannot take any single rate as the exact rate today.

Is the CLO test the same as the rapid urease test?

Yes. In Türkiye the rapid urease test is also called the "CLO test" for short. It does not describe a separate disease or a separate method.

The rapid urease test is done during endoscopy. It uses a small sample of stomach tissue taken during the endoscopy. [4][7]

How is the rapid urease test done?

The doctor first does an endoscopy. If needed, the doctor takes a small tissue sample (biopsy) from the stomach. [9][10] The sample is placed in a test medium that can show the urease enzyme made by the bacterium. [7][14]

A small tissue sample being taken from the stomach wall with an endoscope. biopsy sample stomach wall endoscope

The urease enzyme breaks down the urea in the medium. This breakdown can change the acidity (pH) and the color of the medium. [7][14] A color change can point to a positive result. [14]

The three steps of the rapid urease test: the sample, the breakdown of urea, and the color change. 1 2 3 sample urea is broken down color may change

How the color is read depends on the test system used. Your doctor interprets the result. [7]

You may be awake during the endoscopy. A medicine that numbs the throat (local anesthesia) or sedation (a calming medicine) may be used. [10] Ask before the procedure which method is planned.

The length of the procedure depends on the examination and on any extra procedures. The endoscopy team tells you the time. [10] Ask the team about the practice at your center. Product information about the test is on the page rapid urease test performed on a biopsy during endoscopy.

How do I prepare for the rapid urease test?

The fasting time differs from center to center. One patient information document says the doctor may ask you to stop eating and drinking for up to 8 hours before the procedure. [9] Get the time from the written instructions of the center where you have your appointment. If the instructions are not clear, call the endoscopy unit.

Tell the endoscopy team about all the medicines you take. Mention blood thinners and diabetes medicines in particular. [9][15] Do not stop these medicines on your own. The doctor decides whether to stop them or change the dose. [9][15]

If sedation is planned, learn in advance the center's rules about having someone take you home and about driving. [10] During the consent process you can ask questions about the biopsy, the risks and the options.

Do medicines affect the test result? (PPI, antibiotics, bismuth)

Yes. Medicines that suppress stomach acid (proton pump inhibitors, PPIs for short) and antibiotics used in the recent past can lower the amount of bacteria. This can make a negative result misleading. [8] If you have used a medicine that contains bismuth, tell the team about that too. [3]

A break from medicines may be needed before a diagnostic test. The German guideline (DGVS) recommends waiting 2 weeks after a PPI ends and 4 weeks after an antibiotic ends. [8] For the follow-up test after treatment, the ACG 2024 guideline gives a gap of 2 weeks for a PPI and 4 weeks for antibiotics and bismuth. [3] These times are guideline information. They are not the times that apply to you.

CAUTION: If you use a PPI, an antibiotic or bismuth, do not stop the medicine on your own. Tell the endoscopy team or your doctor which medicine you use and when you last took it. The doctor decides whether a break is needed. [3][8]

Factors that can affect the test result; the doctor decides whether to stop any medicine. test result PPI (acid medicine) antibiotic bismuth bleeding sample site doctor decides

If you have had bleeding from the upper digestive tract, tell the team that as well. Recent bleeding and some changes of the stomach lining can affect the test result. [8]

When is the rapid urease test result ready?

The time for the result depends on the center and on the test system used. Ask the endoscopy team for the time.

The result of a biopsy sent to pathology can take a few days or longer. [9] The rapid urease result and the pathology result are not the same thing. Ask the endoscopy team when and how the result will be given to you.

What does it mean if the CLO test is positive?

A positive result supports the presence of H. pylori in the sample. [4][14] A positive result does not mean cancer. [1] The doctor assesses whether treatment is needed. [12]

Treatment usually consists of more than one medicine. An acid-suppressing medicine is used together with more than one class of antibiotic. Some plans also include a medicine from the bismuth class. [2][12] The doctor chooses the plan based on your earlier antibiotic use, your allergies and your other health information. [2][12]

This guide does not give medicine names or doses. Complete the treatment as your doctor plans it.

If the CLO test is negative, is the stomach bacterium definitely absent?

No. A positive result is usually reliable, but a negative result does not always rule out the infection. [4] The sources report that the test detects the bacterium in about 90 percent of cases or more. The ranges differ by source and depend on conditions. [4][8]

A PPI, recent antibiotics, upper digestive tract bleeding and the site where the sample was taken can affect the result. [4][8] Based on your symptoms and other findings, the doctor may order another test. [8]

Do not read a negative result alone as "the bacterium is definitely absent." Talk about the result with the doctor who ordered the test.

Which tests show the stomach bacterium?

There are several tests for the stomach bacterium. If an endoscopy is not needed, a urea breath test or a stool antigen test may be considered. [11][12] If an endoscopy is being done anyway, tests done on a biopsy can also be used. [1][4]

A diagram of the breath, stool and biopsy-based tests for the stomach bacterium. the doctor chooses breath test stool antigen test biopsy test at endoscopy

The doctor decides which test suits you. The doctor looks at your symptoms and at whether you need an endoscopy. The sources do not choose a single test. [11][12]

A blood test (antibody test) can stay positive even after an old infection. For this reason it may not reliably show whether there is an active infection today or whether the treatment worked. [11][12]

Not everyone needs an endoscopy just to look for the stomach bacterium. The decision for endoscopy depends on age, symptoms, alarm signs and other risks. [3]

Do I need a follow-up test after treatment?

Yes. Guidelines recommend confirming with a test that the treatment worked. A test shows that the bacterium has been cleared. Symptoms going away does not show this on its own. [2][3]

The follow-up test is usually done with a urea breath test or a stool antigen test. [3] The rapid urease test is usually not chosen for this purpose. [4] The ACG 2024 guideline recommends testing at least 4 weeks after treatment ends. The gap before the test is 2 weeks for a PPI and 4 weeks for antibiotics and bismuth. [2][3]

A timeline of treatment, the waiting period and the follow-up test; the doctor sets the times. treatment medicine break retest set by your doctor

Your doctor sets the date of the follow-up test and the medicine break. The times in this guide are not instructions for you.

What can happen after an endoscopy, and when should I go to the emergency room?

If you have shortness of breath, vomiting blood, black stools, fever or severe pain that keeps getting worse, get emergency medical help right away. [9]

You may feel discomfort during and after the procedure. [10] If you had sedation, follow the center's instructions on discharge, on having someone with you and on driving. [10]

Possible risks include breathing or heart problems linked to sedation, bleeding and, very rarely, a hole (perforation) in the wall of the digestive tract. [9]

WARNING: If any of the following happens after endoscopy, get emergency medical help right away. If a symptom is life-threatening, call 112 (or your local emergency number) right away:

  • Shortness of breath
  • Chest or abdominal pain that keeps getting worse or is severe
  • Vomiting blood or material that looks like coffee grounds
  • Black stools
  • Fever
  • Worsening trouble swallowing

[9]

Questions you can ask your nurse

  1. Do I need an endoscopy, or is a breath or stool test enough for me?
  2. Will a rapid urease test be done during the endoscopy? Will a biopsy be taken?
  3. I take a PPI, an antibiotic or a medicine that contains bismuth. What should I do before the test?
  4. When and how will I be told my result?
  5. If my rapid urease result is negative, do I need another test?
  6. If the result is positive, what will my treatment plan be?
  7. After treatment, when and with which method will we do the follow-up test?
  8. If I have sedation, how should I get home, and when can I drive?
  9. How should I take my blood thinner or diabetes medicine on the day of the procedure?

Frequently asked questions

What is the rapid urease test?

It is a test that looks for the urease enzyme of the stomach bacterium (H. pylori) in a small stomach sample taken during endoscopy. [4][7] The sample is placed in a test medium. A color change can point to a positive result. [14]

What is the CLO test? Is it the same as the urease test?

Yes. The CLO test is one of the names given to the rapid urease test in Türkiye. It is not a separate type of infection.

How is the rapid urease test done?

During the endoscopy the doctor takes a small tissue sample from the stomach. [9][10] The sample is placed in a medium that can show the urease enzyme. If the result is positive, the color of the medium may change. [7][14]

What does a positive rapid urease test mean?

It supports the presence of H. pylori in the sample. [4][14] It does not mean cancer. The doctor makes the treatment decision. [1][12]

If the CLO test is negative, is the stomach bacterium definitely absent?

No. Medicines, bleeding and sampling conditions can lower the sensitivity of the test. [4][8] The doctor orders another test if needed. [8]

Is the rapid urease test result ready the same day?

The time and the way the result is given differ from center to center. Ask your center. The pathology result comes later. [9]

Can the urease test be done while I take a PPI?

A PPI can push the result toward a misleading negative. [8] The German guideline recommends waiting 2 weeks after the PPI ends. [8] Do not stop the medicine on your own; tell your doctor.

Is the test affected if I used an antibiotic or bismuth?

Yes, recent antibiotic use can lower the sensitivity of the test. [8] The German guideline recommends waiting 4 weeks after an antibiotic. [8] If you used bismuth, tell your doctor too. The doctor decides what to do.

Which is better, the urea breath test or the stool test?

Both can be used to assess an active infection. [11][12] The choice depends on access, on the clinical situation and on how you prepare for the test. [11][12]

Does a blood test show that the stomach bacterium is still there?

It may not. Antibodies can remain even after an old infection. [11][12] For a check after treatment, a breath or stool test is usually used. [3]

Is a biopsy required during endoscopy?

No. The doctor takes a small tissue sample if the doctor finds it necessary. [10] The decision depends on the endoscopy findings and on the clinical reason.

Do I need a follow-up test after treatment?

Yes. Symptoms going away does not show on its own that the bacterium has been cleared. [2][3] At the right time the doctor plans a breath or stool test. [2][3]

About this guide

Melekırmak prepared this guide. It is based on guidelines and patient information documents. It does not replace the advice of your doctor. Melekırmak is the distributor in Türkiye of some of the medical supplies used in the procedures described in this guide.

Published:
Last updated:

Sources

Back to Knowledge Centre