AutoFuser K

Measurements at a glance

Fill volume: 100/250 ml; by model
Flow rate: 1.5/2/4/5 ml/h; by model

Models

Fill volume (ml)	Flow rate (ml/h)	SUT code	Model
100 ml bottle
100	2	OR1810	UPKBTGP-2
100	4	OR1810	UPKBTGP-4
250 ml bottle
250	1.5	OR1830	UPKDTGP-1.5
250	2	OR1820	UPKDTGP-2
250	5	OR1810	UPKDTGP-5

Fill volumes: 100 and 250 ml
Flow rates: One fixed rate per item: 1.5, 2, 4 and 5 ml/h
Flow accuracy: Plus minus 10 per cent on the 100 ml body, plus minus 15 per cent on the 250 ml body
Residual volume: At most 5 ml on the 100 ml body, at most 10 ml on the 250 ml body
Air filter: 5.0 micrometres, clearing the air left in the fluid path by itself
Calibration: The flow rate is calibrated with 0.9 per cent sodium chloride

Five catalogue numbers fall on two bottle volumes and four flow rates, and all of them are the continuous-flow type.

A single-use elastomeric infusion pump with a silicone balloon, delivering the drug continuously at a pre-set constant rate.

In which cases?

A chemotherapy infusion the patient goes home with.
Continuous analgesia in postoperative and cancer pain, through perineural, epidural and intraoperative-site routes.
Antibiotic therapy and hydration.
Treatments that move between the hospital, ambulatory care and home care.

What makes it different?

The rigid housing holds the inner elastomeric membrane against physical impact and is fully transparent, so the drug left in the pump is seen through it.
The air filter on the line clears the air left in the balloon and above the filter by itself; its pore is 5.0 micrometres.
The line carries a purge filter and a spin-lock connector as well as the air filter.

Frequently asked questions

Is there a bolus button?

Not on these items. The five catalogue numbers supplied are the continuous-flow type; the rate selector and the bolus button belong to other types of the family.

Which volumes and rates are supplied?

2 and 4 ml/h on the 100 ml body, 1.5, 2 and 5 ml/h on the 250 ml body. The models table gives the volume and the rate of every catalogue number.

Related products

Standard Hard-Shell Infusion Pump

Light-Protected Hard-Shell Infusion Pump

Port Needle

Technical data

Manufacturer: Ace Medical
Class: IIb
SUT codes: OR1810OR1830OR1820
Sterility and shelf life: Sterilised with ethylene oxide, single use, shelf life 36 months
Storage: Room temperature, between 0 and 40 degrees Celsius, away from direct sunlight
Housing: A clear rigid housing holding the silicone balloon reservoir
Light protection: A UV-protection material is listed as an option in the product family
Flow type: Continuous basal flow only; the rate selector and the bolus button belong to other types of the family
On the line: Injection cap, clamp, air filter, purge filter, spin-lock connector and medical grade tubing
Filling and priming: The reservoir is filled with a syringe using aseptic technique, the injection cap is closed and the line is primed until fluid shows at the patient end
Material: Latex free and DEHP free